Sleep Heart Health Study PSG Database 1.0.0

File: <base>/reports.shtml (8,113 bytes)
<!--#set var="TITLE" value="SHHS Polysomnography Database"-->
<!--#include virtual="/head.shtml"-->

<center><h2>Clinical correlate and quality reports</h2></center>

<p>
<a href="./">Return to the SHHS PSG Database</a>

<p>
Quality control procedures for data acquisition and scoring are described in <a
href="./#ref3">[3]</a>. All studies were reviewed at the Reading Center and
assigned quality codes, grading overall study quality and quality of each
channel.  Signal and study quality codes, specific to each technician, each
monitor, and each site, were summarized and reported on a monthly basis. These
data were reviewed on a monthly basis by members of a Polysomnography
Subcommittee. Sites and individual technicians were expected to produce at
least 85% of studies with a grade of "Good" or better. Those who did not reach
this standard were identified.  Any downward trending of quality or deviation
of specific technicians required a written response from the Principle
Investigator from that respective site. These data were reviewed periodically
with members of the Steering Committee, the NIH program office, and a Data and
Safety Monitoring Board.

<p>
<strong>Scorer Training and Certification:</strong> Each scorer underwent
extensive training with the other SHHS scorers, a Chief Polysomnologist and
Reading Center Investigators.  Scorer certification required the demonstration
of a complete understanding of scoring rules and achievement of a 90% level of
agreement with the Chief Polysomnologist for respiratory events and sleep
stages and a 85% level of agreement for arousals for 10 or more independently
scored practice records.  Reliability and accuracy of scored data were
evaluated on an ongoing basis, including formal reliability studies <a
href="./#ref4">[4]</a> and ongoing scoring exercises.

<p>
<strong>Record Grading:</strong> Each record is assigned an overall grade as
follows:

<ul>
<li>
<em>Outstanding:</em> All channels are graded as mostly artifact free for &gt; 5
hours and entire sleep time.

<li>
<em>Excellent:</em> At least one EEG channel, one EOG channel, EMG, oximetry,
all respiratory channels usable for &gt; 5 hours and &gt; 75% of sleep time.

<li>
<em>Very good:</em> At least one EEG channel, oximetry, airflow and either
chest or abdomen usable for &gt; 5 hours and &gt; 50% of sleep time.

<li>
<em>Good:</em> At least one respiratory channel (airflow or either band),
oximetry and one EEG usable for &gt; 5 hours and &gt; 50% of sleep time.

<li>
<em>Fair:</em> At least one respiratory channel, oximetry and one EEG usable
for &gt; 4 hours or study scored sleep-wake only (because of the EEG artifact).

<li>
<em>Poor (Failed):</em> &lt; 4 hours of usable data on at least one respiratory
channel, oximetry and one EEG.
</ul>

<p>
(SHHS-1 records did not use the percentage of sleep time during which signals
were artifact free, and only relied on the absolute duration of artifact free
data.)

<p>
<strong>Manual Scoring:</strong> An Atlas detailing scoring,
with pictorial examples, is found in the <a
href="http://www.jhucct.com/shhs/default.html" target="other">SHHS Reading
Center Manual of Procedures</a>.

<p>
Sleep stages were identified for each 30
second epoch using Rechtshafflen and Kales criteria <a href="./#ref5">[5]</a>.

<p>
Arousals were characterized by the American Academy of Sleep Medicine criteria
<a href="./#ref6">[6]</a>. An EEG arousal is an abrupt shift in EEG frequency, which may include
alpha and/or theta waves and/or frequencies greater than 16 Hz, but not sleep
spindles, lasting at least 3 s., and starting after at least 10 continuous
seconds of sleep. In stage REM, an EEG frequency shift must be accompanied by a
simultaneous increase in amplitude of the chin EMG (lasting over 0.5 s.).  An
arousal starts when a definite change in background EEG is visualized.  The
increase in the chin EMG can occur anytime during the arousal (can be at the
end) and is not a marker for the beginning of the arousal. However, increased
EMG activity without a change in background EEG does not constitute an arousal.

<p>
Apneas were identified if the amplitude (peak to trough) of the airflow signal
was flat or nearly flat. This was noted when amplitude decreases below at least
25% of the amplitude of "baseline" breathing (identified during a period of
regular breathing with stable oxygen levels), if this change lasted for &gt; 10
s. Apneas cannot be designated in areas of the study where thermistry is
missing or uninterpretable

<p>
Hypopneas were identified if the amplitude of any respiratory signal decreases
below (approximately) 70% of the amplitude of "baseline" (identified during a
period of regular breathing with stable oxygen levels), if this change lasted
for &gt; 10 s and for &gt;2 breaths.

<p>
"Central" events were noted if displacement was observed on neither the chest
nor the abdominal inductance channels.  Otherwise, events were noted as
"obstructive". Central events cannot be designated if either or both band data
are missing or uninterpretable.

<p>
<strong>Summary data available for each record:</strong> Computer analysis of
the records also linked data from varying channels to identify desaturation
variables, sleep summary data, and various Respiratory Disturbance Indices
(RDIs). The following describe how these data are used (See Data Dictionary for
variable names associated with key summary parameters):

<p>
The desaturation associated with any respiratory event were based on the nadir
desaturation reached within a user defined amount of the time (usually within
30 sec) of the end of the event.  The magnitude of the desaturation for an
event is the difference between the greatest saturation level observed during
the event and this minimum.  The scorer will manually check events to assure
that the appropriate desaturation is identified and modify the time lag as
needed.

<p>
Arousals were associated with events if they begin within 3 s. of the
termination of the respiratory event.

<p>
RDI (Respiratory Disturbance Index) is defined as the number of respiratory
events (apneas and hypopneas) per hour of the sleep. Events will be included in
different indices according to level of associated desaturation and/or arousal:
? Summary RDI values, based on events associated with 0-2%, &gt; 2%, &gt;3%, &gt;4%, and
&gt;5% desaturation levels.  ? Summary RDI values based on events associated with
0-2%, &gt; 2%, &gt;3%, &gt;4%, and &gt;5% desaturation levels and associated arousal.  ?
Summary RDI values based on events associated with arousal regardless of
desaturation.

<p>Time in apnea or hypopnea:
<ul>
<li>Percent of the sleep time in apnea (obstructive or central, with at least a
3% desaturation +/- arousal).

<li>Percent sleep time in hypopnea (with at least a 3% desaturation +/-
arousal).
</ul>

<p>Oxygen desaturation Profile:
<ul>
<li>Percent of the sleep time in desaturation (&lt;95%, &lt;90%, &lt;85%, &lt;80%, &lt;75%).

<li>Number of desaturations/hour of sleep (unlinked with respiratory events) of
2%, 3%, 4%, 5%.
</ul>

<p>Sleep Architecture: 
<ul>
<li>Time and percent of sleep time in each sleep stage.
<li>Arousal index.
<li>Number/hour stage 1 shifts; upward shifts; wake shifts.
<li>Sleep efficiency.
<li>Sleep latency; REM latency (defined both as time from lights off to first
 REM and from onset of sleep to first REM).
</ul>

<p>Heart Rate data: 
<ul>
<li>Maximum, minimum and mean heart rate noted during sleep, associated with 
respiratory events and associated with the arousals (in REM and Non-REM 
separately).
</ul>

<p>Additional Data Available for each record (in QS form): Special events,
generally recognized by pattern recognition, are also coded for each
study. These include:

<ul>
<li>Abnormal Awake EEG 
<li>Alpha intrusion 
<li>Abnormal Eye Movements 
<li>Periodicity  
<li>Cheynes Stokes Breathing (CSB)
<li>Periodic large breaths
<li> Sleep staging/arousal unreliable
<li>Apneas vs hypopneas unreliable
</ul>

<p>
<a href="./">Return to the SHHS PSG Database</a>

<hr>
<!--#include virtual="/footer.shtml"-->
</body>
</html>